1Upload the AIFF audio files whose level you want to change.
2Set a gain in decibels or as a percentage — positive to boost, negative to bring it down.
3Run it; headroom is checked first, so a boost that would clip is flagged rather than silently squared off.
4Download the adjusted AIFF file.
Adjust AIFF Volume FAQ
Does the source format matter?
+
It does. AIFF is Apple's uncompressed PCM format — the Mac-side equivalent of WAV, same size, same fidelity. That decides whether a gain change is an exact edit of the samples or has to go through a re-encode.
Anything specific to AIFF to know?
+
Yes — AIFF is big-endian PCM where WAV is little-endian; the audio is equivalent, and the choice is really about which ecosystem opens it without complaint. Relevant if you plan to adjust the level more than once.
How does Adjust AIFF Volume change the level?
+
Concretely, the gain is applied to the PCM samples directly, so the change is exact and reversible; headroom is checked before writing so a boost clips nothing. You set a gain in decibels or as a percentage and it is applied uniformly across the whole file.
Will boosting the volume distort the audio?
+
Only if it clips. Headroom is checked before the file is written, so a boost that would push peaks past full scale is flagged rather than silently squared off. If the recording is quiet because it is noisy, boosting raises the noise too.
Are bit depth and sample rate preserved?
+
Yes, unless you change them deliberately. A 24-bit/96 kHz source stays 24-bit/96 kHz — nothing is silently downsampled to 16/44.1, which is the failure mode that makes a master unusable.
What can I upload to Adjust AIFF Volume?
+
WAV, FLAC and AIFF, at any bit depth and sample rate up to and including 24-bit/192 kHz. Lossy files work in the same batch if you are mixing sources.
Is there a file size limit on Adjust AIFF Volume?
+
Yes: free accounts process audio up to 15 MB per file — for uncompressed PCM that is roughly twenty minutes of CD-quality stereo, so it is a real limit here in a way it is not for MP3. If you are over it, converting WAV to FLAC first is the free fix — it is lossless and roughly halves the size.
Will Adjust AIFF Volume lower the quality of my AIFF audio files?
+
No. Lossless audio is edited sample-exactly, so what comes back decodes bit-identically to what you would get doing the same edit in a desktop editor. You can repeat the cycle as many times as you like without accumulating any loss at all.
Why would a modern-format site run Adjust AIFF Volume?
+
WEBP.to is built around the modern replacement for both of the old defaults: one format that does lossy, lossless, alpha and animation, and reliably lands smaller than the JPEG or PNG it came from. People arrive here having decided the old defaults are costing them bandwidth, and that decision immediately raises the rest: what size, what quality, what happens to the transparency. Adjust AIFF Volume is on the same upload and the same account so those questions get answered in one place.
Once Adjust AIFF Volume has run, what is worth doing next?
+
The converter on this site moves images to and from WebP, PNG, JPG and AVIF, which is where you decide whether a smaller file is worth losing the older browsers. Doing it in that order matters: pick the pixels first and the container afterwards, because the container is the cheap decision and the pixels are the expensive one.
Do the sibling sites run something different?
+
The engines are identical — same libraries, same workers, same caps. What is different is the opinion attached, and the opinion here rests on a property of the format this site is named after: the same .webp extension can hold a lossy VP8 frame, a lossless one, or an animation, so the sensible processing path is decided per file rather than per extension.
What happens to my file, and is an account required?
+
No account, and nothing is retained: uploads are deleted from the workers shortly after the job finishes, and nothing is inspected, listed or indexed. Accounts exist for history and batch size only.
