2Choose a multiplier — 0.5x for half speed, 2x for double — staying roughly inside 0.75x to 2x if the content is speech.
3Run it; the time-stretch preserves pitch, so voices stay natural instead of transposing upward.
4Download the retimed FLAC file with picture and sound still in sync.
Change FLAC Speed FAQ
Does the source format affect the result?
+
It does. FLAC is lossless compression — bit-identical to the source on decode, at about half the size of WAV. That determines whether the retimed result can be written back cheaply or has to be fully re-encoded.
Anything specific to FLAC here?
+
Yes — FLAC decodes bit-identically to the source, so any number of edit-and-resave cycles cost you nothing in fidelity. Worth knowing before you commit to a large speed change.
How does Change FLAC Speed change the playback rate?
+
Concretely, the time-stretch is applied to the PCM directly and written back losslessly, which is why a lossless source is the right input for anything above about 1.5x where artefacts start to show. Choose a multiplier — 0.5x for half speed, 2x for double — and the whole file is retimed.
Will speeding it up make voices sound high-pitched?
+
No. The time-stretch preserves pitch, so a 1.5x speech track sounds like the same person talking faster rather than like a chipmunk. That is the difference between a proper time-stretch and simply playing the samples faster.
Are bit depth and sample rate preserved?
+
Yes, unless you change them deliberately. A 24-bit/96 kHz source stays 24-bit/96 kHz — nothing is silently downsampled to 16/44.1, which is the failure mode that makes a master unusable.
What can I upload to Change FLAC Speed?
+
WAV, FLAC and AIFF, at any bit depth and sample rate up to and including 24-bit/192 kHz. Lossy files work in the same batch if you are mixing sources.
Is there a file size limit on Change FLAC Speed?
+
Yes: free accounts process audio up to 200 MB per file — for uncompressed PCM that is roughly twenty minutes of CD-quality stereo, so it is a real limit here in a way it is not for MP3. If you are over it, converting WAV to FLAC first is the free fix — it is lossless and roughly halves the size.
Will Change FLAC Speed lower the quality of my FLAC audio files?
+
No. Lossless audio is edited sample-exactly, so what comes back decodes bit-identically to what you would get doing the same edit in a desktop editor. You can repeat the cycle as many times as you like without accumulating any loss at all.
Why would a modern-format site run Change FLAC Speed?
+
WEBP.to is built around the modern replacement for both of the old defaults: one format that does lossy, lossless, alpha and animation, and reliably lands smaller than the JPEG or PNG it came from. People arrive here having decided the old defaults are costing them bandwidth, and that decision immediately raises the rest: what size, what quality, what happens to the transparency. Change FLAC Speed is on the same upload and the same account so those questions get answered in one place.
Once Change FLAC Speed has run, what is worth doing next?
+
The converter on this site moves images to and from WebP, PNG, JPG and AVIF, which is where you decide whether a smaller file is worth losing the older browsers. Doing it in that order matters: pick the pixels first and the container afterwards, because the container is the cheap decision and the pixels are the expensive one.
Do the sibling sites run something different?
+
The engines are identical — same libraries, same workers, same caps. What is different is the opinion attached, and the opinion here rests on a property of the format this site is named after: the same .webp extension can hold a lossy VP8 frame, a lossless one, or an animation, so the sensible processing path is decided per file rather than per extension.
What happens to my file, and is an account required?
+
No account, and nothing is retained: uploads are deleted from the workers shortly after the job finishes, and nothing is inspected, listed or indexed. Accounts exist for history and batch size only.
